ABLOY EL560 Handle-Controlled Mortise Lock | Electrical & Control | BUILD10
BUILD10
Local Service PartnersAI PartnersProduct
About UsContact
BUILD10
← Electrical & ControlProject shortlist (0)
ABLOY EL560

Representative product-family image. The exact configuration may differ.

ABLOY

ABLOY EL560 Handle-Controlled Mortise Lock

Mortise lock with an electrically enabled outside handle and mechanical opening from the inside, for access-controlled solid doors.

Model / SKU
EL560
Category
Locks & Access
Product type
Electromechanical mortise lock
Role
Actuator / load
Manufacturer product page ↗

Control & power

Control type
Switched power
Power supply
12–24 VDC

Use a DC-rated relay or access-control output to switch the solenoid supply. This enables the outside handle; it does not motor-retract the latch for a door operator.

A suitable smart controller can expose supported functions to Matter. The control type alone does not confirm electrical compatibility or actual position feedback.

Technical specifications

Current at 12 VDC
240 mA idle; 550 mA maximumSource ↗
Current at 24 VDC
130 mA idle; 300 mA maximumSource ↗
Deadbolt projection
20 mmSource ↗

Selection & installation notes

  • Select the exact backset, forend, handing and compatible exit furniture. Power-loss operation is configured separately from inside-handle egress.
  • Electrical ratings differ between regional/older documents; use the datasheet supplied with the ordered revision for final supply sizing.
Sources & documentation (2)
  • ABLOY EL560 product information ↗Reviewed Nov 5, 2026
  • ABLOY EL560 / EL561 / EL562 / EL563 manufacturer datasheet ↗Reviewed Nov 5, 2026

© 2026 BUILD10

HomeRecommended DevicesContactPrivacy Policy