Resideo V8043F1512 ProPress Zone Valve

Control & power

Control type

Switched power

Power supply

24 V AC, 50/60 Hz

Switch the valve’s 24 V AC actuator circuit using a suitable thermostat or relay. The end switch is separate and can signal valve opening to the heating controls.

A suitable smart controller can expose supported functions to Matter. The control type alone does not confirm electrical compatibility or actual position feedback.

Technical specifications

Connection

3/4-inch ProPressSource ↗

Flow coefficient

Cv 3.5 (current installation sheet; see sizing note)Source ↗

Electrical connection

Terminal block with end switchSource ↗

Nominal actuator power

6 WSource ↗

Unpowered position

Spring return to closedSource ↗

Selection & installation notes

• A separate correctly sized transformer is required. Use for the documented hydronic application.
• Manufacturer sources disagree on flow coefficient: the product page lists Cv 3.0 and the current installation sheet lists Cv 3.5. Confirm the supplied revision before hydraulic sizing.