Ekinex
Ekinex Delégo Server
Building supervision server that exports selected KNX and Modbus controls to Matter, with a separate Matter controller function.
- Product type
- KNX to Matter bridge
- Model / SKU
- EK-DEL-SRV01
- KNX connection
- Direct KNX TP bus; integrated KNX terminal
- Matter connection
- Ethernet
Matter functions & installation
This bridge exposes supported KNX functions to a Matter platform. Its configuration, firmware and supported endpoint types determine which controls and readings are available.
Documented Matter functions
- On/off, dimmable, tunable-white and RGBW lighting
- Shutters with position feedback
- Venetian blinds with position and optional slat control
- Thermostat temperature, setpoint and heating/cooling
- Air-conditioning mode, optional fan speed and swing
- Switched sockets
Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.
Bridge setup: commands, readings and feedback
Match the ETS group objects to the selected bridge and receiving app. These examples explain configuration requirements; they do not establish compatibility with every bridge.
Switching and dimming
Configure commands and readable status feedback. 1Home requires absolute brightness values for percentage control; relative wall-button dimming alone is insufficient.
1Home instructions ↗Shades and blinds
Map movement, stop and position feedback. Slat adjustment needs matching objects. A timed-position fallback estimates position instead of measuring it.
1Home instructions ↗Climate and sensors
Keep measured temperature and humidity separate from setpoints. A valve output alone is not a complete thermostat. Atios documents the required group addresses for each accessory.
Atios instructions ↗Extra KNX values
1Home can display generic KNX data in its own app without exporting it to Matter. Do not assume that energy, wind, rain or diagnostic values appear in every Matter app.
1Home instructions ↗Technical specifications
KNX to Matter · Selected Modbus widgets to Matter · Matter controller · Building visualization · Automation and logic
- Matter export capacity
- Not confirmed
- Included KNX group addresses
- 1500
- Group-address upgrade
- Optional EK-DEL-UPG02 licence
- Commercial status
- Current manufacturer-documented model; stock and delivered price not verified.
Sources & limitations
Product research reviewed: Nov 4, 2026. This is separate from price, stock and installation-test dates.
Model, firmware & function limitations (8)
- Matter bridge was introduced in software 2.8; update older installations before expecting export.
- The 2.8 manual states that Matter certification is in progress. No completed certificate was independently verified in this research.
- Only supported KNX/Modbus widget templates are exported; generic widgets are excluded.
- Exported thermostats have one setpoint; KNX comfort/standby/economy modes are not passed through by this mapping.
- The 1,500 KNX group-address allowance is not a Matter endpoint limit; a Matter capacity figure was not found.
- New sensor support advertised for software 2.9 concerns the Matter controller and does not establish sensor export through the bridge.
- The manufacturer excludes safety applications; auxiliary signalling is allowed.
- Manufacturer manual 2.8 documents actual bridge setup and exact exported fields. Certification remained in progress in that manual; the record does not claim CSA certification.
Manufacturer documentation & sources (3)
- Delégo Server model, current software and capacity ↗Reviewed Nov 4, 2026
- Matter manual 2.8, pages 17-29: bridge export and certification status ↗Reviewed Nov 4, 2026
- Delégo hardware datasheet: KNX TP, Ethernet and application limits ↗Reviewed Nov 4, 2026