ABB
4-channel universal input interface
Flush-mounted KNX interface for 4 conventional contacts or LED outputs, depending on ETS configuration.
KNX via Matter Bridges
Explore KNX devices and bridges for lighting, climate, shading and building controls. Open a product to see how its functions can connect to Matter.
49–72 of 860 matching entries
ABB
4-channel universal LED dimmer
KNX mains dimmer with 4 outputs, each with a nominal 210 W/VA capacity for compatible loads.
ABB
4-channel universal LED dimmer
KNX mains dimmer with 4 outputs, each with a nominal 315 W/VA capacity for compatible loads.
ABB
4-zone valve drive controller
KNX heating/cooling controller with four independently regulated room zones and valve outputs Variant without manual operation.
ABB
4-zone valve drive controller
KNX heating/cooling controller with four independently regulated room zones and valve outputs Includes manual operation.
ABB
6-channel universal LED dimmer
KNX mains dimmer with 6 outputs, each with a nominal 210 W/VA capacity for compatible loads.
ABB
6-channel universal LED dimmer
KNX mains dimmer with 6 outputs, each with a nominal 315 W/VA capacity for compatible loads.
ABB
8-channel blind/shutter actuator — manual operation
KNX shading actuator for 8 independent 230 V AC motors, with manual operation.
ABB
8-channel blind/shutter actuator — manual operation
KNX shading actuator for 8 independent 24 V DC motors, with manual operation.
ABB
8-channel blind/shutter actuator — travel detection
KNX shading actuator for 8 independent 230 V AC motors, with travel detection.
ABB
8-channel blind/shutter actuator — travel detection and binary inputs
KNX shading actuator for 8 independent 230 V AC motors, with travel detection and binary inputs.
ABB
8-channel C-load switch actuator
KNX 8-channel c-load switch actuator with 8 independently controlled outputs, rated 16 A per output.
ABB
8-channel C-load with energy functions switch actuator
KNX 8-channel c-load with energy functions switch actuator with 8 independently controlled outputs, rated 16 A per output.
ABB
8-channel KNX binary input
KNX input module with 8 channels for 10–230 v ac/dc, requiring external contacts or input signals.
ABB
8-channel Standard switch actuator
KNX 8-channel standard switch actuator with 8 independently controlled outputs, rated 10 A per output.
ABB
8-channel Standard switch actuator
KNX 8-channel standard switch actuator with 8 independently controlled outputs, rated 16 A per output.
ABB
8-channel Standard switch actuator
KNX 8-channel standard switch actuator with 8 independently controlled outputs, rated 6 A per output.
ABB
8-channel switch / 4-channel shutter actuator
KNX actuator with 8 relays, usable individually for switching or in pairs for 4 blind drives Rated 10 A; motor outputs use 230 V AC.
ABB
8-channel switch / 4-channel shutter actuator
KNX actuator with 8 relays, usable individually for switching or in pairs for 4 blind drives Rated 16 A; motor outputs use 230 V AC.
ABB
Fan-coil controller — 2 analogue valves and analogue fan
KNX room-temperature controller for an external fan-coil unit, configured with 2 analogue valves and analogue fan.
ABB
Fan-coil controller — 2 analogue valves and analogue fan, manual control
KNX room-temperature controller for an external fan-coil unit, configured with 2 analogue valves and analogue fan, manual control.
ABB
Fan-coil controller — 2 analogue valves, 3-stage fan
KNX room-temperature controller for an external fan-coil unit, configured with 2 analogue valves, 3-stage fan.
ABB
Fan-coil controller — 2 analogue valves, 3-stage fan, manual control
KNX room-temperature controller for an external fan-coil unit, configured with 2 analogue valves, 3-stage fan, manual control.
ABB
Fan-coil controller — 2 PWM valves and analogue fan, manual control
KNX room-temperature controller for an external fan-coil unit, configured with 2 pwm valves and analogue fan, manual control.
About this catalog
A Matter bridge connects selected KNX functions to a Matter platform. KNX devices retain their KNX connection; they do not become Matter over Thread devices. KNX RF products also need a suitable media coupler.
Open a product for the model, specifications, source evidence and proposed bridge mapping. Supported functions, ETS configuration and tested device–bridge combinations are separate checks. Manufacturer catalog records and records from the official KNX registry identify potential integrations; exact combinations must be commissioned and verified.
Catalog total: 852 KNX devices and 8 Matter bridges. Counts describe catalog entries, including meaningful model variants and explicitly identified families, not stock availability or independently tested combinations.