ABB 24-channel switch / 12-channel shutter actuator | KNX via Matter | BUILD10
BUILD10
Local Service PartnersAI PartnersProduct
About UsContact
BUILD10
← KNX via Matter catalogProject shortlist (0)
ABB 24-channel switch / 12-channel shutter actuator SAH/S 24.16.7.1

ABB

ABB 24-channel switch / 12-channel shutter actuator

KNX actuator with 24 relays, usable individually for switching or in pairs for 12 blind drives Rated 16 A; motor outputs use 230 V AC.

Product type
Lighting & switching
Model / SKU
SAH/S 24.16.7.1
KNX connection
KNX; consult the exact model documentation and ETS application

Connecting this device to Matter

This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.

Functions to map through a bridge

  • Switched load / outlet
  • Shades / blinds

Selected native KNX functions can be mapped using a suitable Matter bridge. Additional probes, contacts, couplers, controlled equipment or temperature controllers may be required as described below. Exact device–bridge combinations have not been tested.

Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.

Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.

Bridge options by function

These options match the product’s KNX functions to capabilities documented for a bridge. Open the bridge for its requirements and limitations.

1Home Voice & Visu

Function mapping, not a tested device–bridge pair

Switched load / outlet · Shades / blinds

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

1Home Server KNX Pro

Function mapping, not a tested device–bridge pair

Switched load / outlet · Shades / blinds

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Atios KNX Bridge

Function mapping, not a tested device–bridge pair

Switched load / outlet · Shades / blinds

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Technical specifications

Switching · Shading

Relay outputs
24
Nominal current
16 A
Motor voltage
230 V AC

Sources & limitations

Product research reviewed: Nov 5, 2026. This is separate from price, stock and installation-test dates.

Model, firmware & function limitations (3)
  • Requires a commissioned KNX installation, mapped group addresses and a KNX-to-Matter bridge that supports the selected function. Exact device/bridge pair not physically tested.
  • Shared outputs: switching and blind counts are alternative configurations. Blind outputs have no electromechanical interlock; follow the ABB configuration requirements.
  • Exact model and KNX function identified in manufacturer documentation. Matter applicability is function-level and requires bridge configuration; not a tested pair.
Manufacturer documentation & sources (3)
  • ABB — 24-channel switch / 12-channel shutter actuator ↗Reviewed Nov 5, 2026
  • KNX Association product registry — SAH/S 24.16.7.1 ↗Reviewed Nov 5, 2026
  • ABB SAH/S 24.16.7.1 technical documentation ↗Reviewed Nov 5, 2026
← Back to resultsOpen project shortlist

© 2026 BUILD10

HomeRecommended DevicesContactPrivacy Policy