Ekinex ÆVO 8-output universal actuator | KNX via Matter | BUILD10
BUILD10
Local Service PartnersAI PartnersProduct
About UsContact
BUILD10
← KNX via Matter catalogProject shortlist (0)
Ekinex ÆVO 8-output universal actuator EK-FG1-TP

Ekinex

Ekinex ÆVO 8-output universal actuator

KNX actuator with 8 relay outputs for switched loads or paired motor drives.

Product type
Lighting & switching
Model / SKU
EK-FG1-TP
KNX connection
KNX; consult the exact model documentation and ETS application

Connecting this device to Matter

This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.

Functions to map through a bridge

  • Switched load / outlet
  • Shades / blinds

Selected native KNX functions can be mapped using a suitable Matter bridge. Additional probes, contacts, couplers, controlled equipment or temperature controllers may be required as described below. Exact device–bridge combinations have not been tested.

Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.

Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.

Bridge options by function

These options match the product’s KNX functions to capabilities documented for a bridge. Open the bridge for its requirements and limitations.

1Home Voice & Visu

Function mapping, not a tested device–bridge pair

Switched load / outlet · Shades / blinds

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

1Home Server KNX Pro

Function mapping, not a tested device–bridge pair

Switched load / outlet · Shades / blinds

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Atios KNX Bridge

Function mapping, not a tested device–bridge pair

Switched load / outlet · Shades / blinds

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Technical specifications

Switching · Shading

Relay outputs
8
Blind-drive capacity
4
Relay rating
230 V AC, 16 A

Sources & limitations

Product research reviewed: Nov 5, 2026. This is separate from price, stock and installation-test dates.

Model, firmware & function limitations (3)
  • Motor channels use two outputs each. Configure travel time and feedback before mapping shades to Matter.
  • Requires an independently selected KNX-to-Matter bridge and ETS group-address mapping. Exact device/bridge pairing has not been physically tested.
  • Official manufacturer product page confirms the KNX product and the listed native functions. Matter export is a function-level integration candidate, not a manufacturer-tested exact pairing.
Manufacturer documentation & sources (1)
  • Ekinex — ÆVO 8-output universal actuator ↗Reviewed Nov 5, 2026
← Back to resultsOpen project shortlist

© 2026 BUILD10

HomeRecommended DevicesContactPrivacy Policy