Hager 360° recessed presence detector | KNX via Matter | BUILD10
BUILD10
Local Service PartnersAI PartnersProduct
About UsContact
BUILD10
← KNX via Matter catalogProject shortlist (0)
Hager 360° recessed presence detector TCC510S

Hager

Hager 360° recessed presence detector

KNX presence sensor for occupancy-driven room automation.

Product type
Sensors & inputs
Model / SKU
TCC510S
KNX connection
KNX; consult the exact model documentation and ETS application

Connecting this device to Matter

This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.

Functions to map through a bridge

  • Occupancy

Selected native KNX functions can be mapped using a suitable Matter bridge. Additional probes, contacts, couplers, controlled equipment or temperature controllers may be required as described below. Exact device–bridge combinations have not been tested.

Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.

Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.

Bridge options by function

These options match the product’s KNX functions to capabilities documented for a bridge. Open the bridge for its requirements and limitations.

1Home Voice & Visu

Function mapping, not a tested device–bridge pair

Occupancy

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

1Home Server KNX Pro

Function mapping, not a tested device–bridge pair

Occupancy

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Atios KNX Bridge

Function mapping, not a tested device–bridge pair

Occupancy

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Technical specifications

Presence

Detailed specifications for this exact version are not yet recorded.

Sources & limitations

Product research reviewed: Nov 5, 2026. This is separate from price, stock and installation-test dates.

Model, firmware & function limitations (4)
  • Requires a commissioned KNX installation, mapped group addresses and a KNX-to-Matter bridge that supports the selected function. Exact device/bridge pair not physically tested.
  • Detector behaviour and occupancy output must be configured in ETS. Additional local light-control features are not automatically exported to Matter.
  • Documented in an earlier manufacturer catalogue; check the current regional lifecycle, replacement model and availability before specifying a new installation.
  • Exact model and KNX function identified in manufacturer documentation. Matter applicability is function-level and requires bridge configuration; not a tested pair. Earlier-generation manufacturer catalogue entry; current sale and availability have not been individually established.
Manufacturer documentation & sources (2)
  • Hager — 360° recessed presence detector ↗Reviewed Nov 5, 2026
  • Hager manufacturer product page — TCC510S ↗Reviewed Nov 5, 2026
← Back to resultsOpen project shortlist

© 2026 BUILD10

HomeRecommended DevicesContactPrivacy Policy