Connecting this device to Matter
This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.
Functions to map through a bridge
- Occupancy
- Illuminance
- Temperature
Selected native KNX functions can be mapped using a suitable Matter bridge. Additional probes, contacts, couplers, controlled equipment or temperature controllers may be required as described below. Exact device–bridge combinations have not been tested.
Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.
Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.
Technical specifications
Presence · Illuminance · Temperature
- KNX connection
- TP wired bus
- Detection
- 360° PIR
- Ingress protection
- IP44 with required installation seals
- Security
- KNX Data Secure
- Ambient temperature
- −25 ... +55 °C
- Storage/transport temperature
- −25 ... +70 °C
- Relative humidity
- 10 ... 100 % (no condensation)
- Protection class
- III
- Degree of protection
- IP44
- Detection angle
- 360°
- Detection range
- depending on the direction of movement
- Accuracy (> 80 lx)
- ± 20 %
- Dimensions (Ø x H)
- 53.5 x 38 mm (with design ring)
- Ceiling cut-out (Ø x D)
- 44 x 35 mm
- KNX medium
- TP 256
- Commissioning mode
- S-mode
- Rated voltage KNX
- DC 21 ... 32 V SELV
- Current consumption KNX
- 4 ... 10 mA
Specifications with sources (14)