BUILD10
Local Service PartnersAI PartnersProduct
About UsContact
BUILD10
← KNX via Matter catalogProject shortlist (0)
MDT RF+ Heating Valve Drive — RF-HVA1ILB.01S RF-HVA1ILB.01S

MDT

MDT RF+ Heating Valve Drive — RF-HVA1ILB.01S

KNX RF radiator valve drive with room-temperature control and local setpoint adjustment.

Product type
Climate
Model / SKU
RF-HVA1ILB.01S
KNX connection
KNX RF through a suitable RF/TP media coupler

Connecting this device to Matter

This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.

Functions to map through a bridge

  • Thermostat control
  • Temperature

Selected native KNX functions can be mapped using a suitable Matter bridge. Additional probes, contacts, couplers, controlled equipment or temperature controllers may be required as described below. Exact device–bridge combinations have not been tested.

Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.

Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.

Bridge options by function

These options match the product’s KNX functions to capabilities documented for a bridge. Open the bridge for its requirements and limitations.

1Home Voice & Visu

Function mapping, not a tested device–bridge pair

Thermostat control · Temperature

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

1Home Server KNX Pro

Function mapping, not a tested device–bridge pair

Thermostat control · Temperature

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Atios KNX Bridge

Function mapping, not a tested device–bridge pair

Thermostat control · Temperature

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Technical specifications

Thermostat · Temperature

KNX connection
KNX RF
KNX Data Secure Function
Yes
Battery
Lithium battery

Sources & limitations

Product research reviewed: Nov 5, 2026. This is separate from price, stock and installation-test dates.

Model, firmware & function limitations (3)
  • Uses KNX RF, not Thread; a compatible KNX RF/TP coupler is required to reach the KNX installation and Matter bridge.
  • Eligibility is based on KNX group-object functions and bridge function support; this exact device/bridge pair has not been physically tested.
  • Exact article number and functional variant were read from the official manufacturer page. Cosmetic finish variants and passive accessories were collapsed/excluded. No exact Matter pair test is claimed.
Manufacturer documentation & sources (2)
  • MDT RF+ Heating Valve Drive — official product variants and documentation ↗Reviewed Nov 5, 2026
  • MDT RF-HVA1ILB.01S technical documentation ↗Reviewed Nov 5, 2026
← Back to resultsOpen project shortlist

© 2026 BUILD10

HomeRecommended DevicesContactPrivacy Policy
MDT RF+ Heating Valve Drive — RF-HVA1ILB.01S | KNX via Matter | BUILD10