MEAN WELL SPWM-75-KN 75W LED Driver with KNX interface | KNX via Matter | BUILD10
BUILD10
Local Service PartnersAI PartnersProduct
About UsContact
BUILD10
← KNX via Matter catalogProject shortlist (0)
SPWM-75-KN 75W LED Driver with KNX interface

Representative image of the product family. Confirm the exact model and configuration.

MEAN WELL

MEAN WELL SPWM-75-KN 75W LED Driver with KNX interface

KNX lighting driver or dimming actuator for compatible luminaires.

Product type
Lighting & switching
Model / SKU
SPWM-75-KN
KNX connection
KNX; consult the exact model documentation and ETS application

Connecting this device to Matter

This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.

Functions to map through a bridge

  • Lighting brightness and on/off

Selected native KNX functions can be mapped using a suitable Matter bridge. Additional probes, contacts, couplers, controlled equipment or temperature controllers may be required as described below. Exact device–bridge combinations have not been tested.

Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.

Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.

Bridge options by function

These options match the product’s KNX functions to capabilities documented for a bridge. Open the bridge for its requirements and limitations.

1Home Voice & Visu

Function mapping, not a tested device–bridge pair

Lighting brightness and on/off

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

1Home Server KNX Pro

Function mapping, not a tested device–bridge pair

Lighting brightness and on/off

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Atios KNX Bridge

Function mapping, not a tested device–bridge pair

Lighting brightness and on/off

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Technical specifications

Dimming

Registry model / order number
SPWM-75-KN
Rated family power
75 WProduct-family specification; confirm the selected variant.
Dimensions
290 × 38 × 28.5 mmProduct-family specification; confirm the selected variant.
Output technology
Constant-voltage PWM; configurable dimming, tunable white or RGBWProduct-family specification; confirm the selected variant.
KNX Data Secure
SupportedProduct-family specification; confirm the selected variant.
Voltage variants
SPWM-75-12KN (12 V) or SPWM-75-24KN (24 V)Product-family specification; confirm the selected variant.
Specifications with sources (6)

Rated family power

75 W

View specification source ↗

family

Dimensions

290 × 38 × 28.5 mm

View specification source ↗

family

Output technology

Constant-voltage PWM; configurable dimming, tunable white or RGBW

View specification source ↗

family

KNX Data Secure

Supported

View specification source ↗

family

Voltage variants

SPWM-75-12KN (12 V) or SPWM-75-24KN (24 V)

View specification source ↗

family

limitations

The series name is not a complete voltage-specific ordering code. Select the correct output-voltage variant and LED load. The -KN version connects to KNX; similarly named -MA products are separate Matter models.

View specification source ↗

Sources & limitations

Product research reviewed: Nov 5, 2026. This is separate from price, stock and installation-test dates.

Model, firmware & function limitations (5)
  • Match the output type and electrical rating to the lighting load. Only brightness and on/off are proposed here; color, energy data and diagnostic functions need separate confirmation.
  • Product identity and the native function are documented in the official KNX device registry. Matter applicability is an inference from the documented bridge function type, not an exact-SKU compatibility test. Verify the current manufacturer ETS application and required command/status objects before specification.
  • Current production status, availability and price have not been confirmed.
  • Official KNX registry model and function; proposed Matter mapping requires ETS object and bridge validation.
  • The series name is not a complete voltage-specific ordering code. Select the correct output-voltage variant and LED load. The -KN version connects to KNX; similarly named -MA products are separate Matter models.
Manufacturer documentation & sources (4)
  • KNX Association — SPWM-75-KN 75W LED Driver with KNX interface ↗Reviewed Nov 5, 2026
  • MEAN WELL — official KNX lighting driver and actuator product range ↗Reviewed Nov 5, 2026
  • MEAN WELL KNX building-automation catalog, 2026 ↗Reviewed Nov 5, 2026
  • MEAN WELL Europe — KNX series and product-family photographs ↗Reviewed Nov 5, 2026
← Back to resultsOpen project shortlist

© 2026 BUILD10

HomeRecommended DevicesContactPrivacy Policy