Theben HM 6 T KNX

Connecting this device to Matter

This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.

Selected native KNX functions can be mapped using a suitable Matter bridge. Additional probes, contacts, couplers, controlled equipment or temperature controllers may be required as described below. Exact device–bridge combinations have not been tested.

Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.

Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.

Bridge options by function

These options match the product’s KNX functions to capabilities documented for a bridge. Open the bridge for its requirements and limitations.

Technical specifications

Thermostat

Article number

4940240

Control

P/PI heating and cooling

Actuator supply

24–240 V AC

Channel count

6

Width

4 modules

Ambient temperature

-5°C ... 45°C

KNX bus current

≤4 mA

Operating voltage

110 V AC - 240 V AC, 50 Hz - 60 Hz

Installation type

DIN rail

Switching output

Not potential-free

Output

Triac, 0.45 A

Voltage output

24 V AC - 240 V AC

Type of protection

IP 20

Protection class

II according to EN 60 669

Sources & limitations

Product research reviewed: Nov 5, 2026. This is separate from price, stock and installation-test dates.