Zennio QUAD v3 | KNX via Matter | BUILD10
BUILD10
Local Service PartnersAI PartnersProduct
About UsContact
BUILD10
← KNX via Matter catalogProject shortlist (0)
Zennio QUAD v3 ZIOQUADV3

Zennio

Zennio QUAD v3

KNX input module for external contacts and compatible temperature probes.

Product type
Sensors & inputs
Model / SKU
ZIOQUADV3
KNX connection
KNX bus

Connecting this device to Matter

This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.

Functions to map through a bridge

  • Contact state
  • Temperature
  • Thermostat control

Selected native KNX functions can be mapped using a suitable Matter bridge. Additional probes, contacts, couplers, controlled equipment or temperature controllers may be required as described below. Exact device–bridge combinations have not been tested.

Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.

Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.

Bridge options by function

These options match the product’s KNX functions to capabilities documented for a bridge. Open the bridge for its requirements and limitations.

1Home Voice & Visu

Function mapping, not a tested device–bridge pair

Contact state · Temperature · Thermostat control

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

1Home Server KNX Pro

Function mapping, not a tested device–bridge pair

Contact state · Temperature · Thermostat control

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Atios KNX Bridge

Function mapping, not a tested device–bridge pair

Contact state · Temperature · Thermostat control

Proposed from documented KNX and bridge function types. Verify the exact ETS application, required command/status objects, KNX Secure access and receiving-app support. This model–bridge pair has not been physically tested.

View mapping source ↗

Technical specifications

Door / window input · Temperature · Thermostat

KNX connection
KNX bus
KNX Secure
Supported; project and bridge configuration must match
Dimensions
39.1 x 39.1 x 14 mm
Operating temperature
0 .. +55 °C
KNX voltage range
21-31 VDC
Protection rating
IP20
Input count
4
Device power
Powered from the KNX bus; no separate device supply required
Specifications with sources (6)

Dimensions

39.1 x 39.1 x 14 mm

View specification source ↗

Operating temperature

0 .. +55 °C

View specification source ↗

KNX voltage range

21-31 VDC

View specification source ↗

Protection rating

IP20

View specification source ↗

Input count

4

View specification source ↗

Device power

Powered from the KNX bus; no separate device supply required

View specification source ↗

Sources & limitations

Product research reviewed: Nov 5, 2026. This is separate from price, stock and installation-test dates.

Model, firmware & function limitations (4)
  • A separate contact or temperature probe is required; the module alone does not measure door position or room temperature.
  • The internal thermostat requires a temperature source and a configured actuator/control zone before Matter export.
  • Eligibility is based on KNX group-object functions and bridge function support; this exact device/bridge pair has not been physically tested.
  • Exact model reference and KNX functions are documented on the manufacturer product page. No physical device/bridge test or universal Matter compatibility is claimed.
Manufacturer documentation & sources (2)
  • Zennio QUAD v3 — official product and documentation ↗Reviewed Nov 5, 2026
  • Zennio QUAD v3 — manufacturer datasheet ↗Reviewed Nov 5, 2026
← Back to resultsOpen project shortlist

© 2026 BUILD10

HomeRecommended DevicesContactPrivacy Policy