Theben
Optical KNX ceiling sensor with six configurable detection zones for occupancy, lighting control and room-use analysis.
This product uses KNX. A compatible bridge can expose selected functions to Matter through its IP connection. The KNX device itself does not become a Matter over Thread device.
This is a KNX device, not a native Matter product. Export requires a KNX-to-Matter bridge, ETS group-address configuration and support for the chosen Matter device type. This exact device/bridge combination has not been tested. People counts, precise location, heatmaps and occupancy-density statistics are not promised through Matter. Basic zone presence requires bridge-supported group-address mapping.
Commission the KNX installation in ETS, then configure the bridge with the required group addresses, data types and status feedback. Check the exact bridge firmware and your Matter platform. Native KNX functions, electrical ratings and Matter functions are separate specifications.
Function mapping is not a tested device–bridge pair or individual Matter certification for this KNX model. Protection functions and essential local automation should remain in the KNX installation.
These options match the product’s KNX functions to capabilities documented for a bridge. Open the bridge for its requirements and limitations.
Function mapping, not a tested device–bridge pair
Temperature · Illuminance · Occupancy
The bridge documents these function types. Commission the required KNX command and feedback objects in ETS, then map them in the bridge. Exact model pairing has not been tested; receiving-app support must also be checked.
View mapping source ↗Function mapping, not a tested device–bridge pair
Temperature · Illuminance · Occupancy
The bridge documents these function types. Commission the required KNX command and feedback objects in ETS, then map them in the bridge. Exact model pairing has not been tested; receiving-app support must also be checked.
View mapping source ↗Function mapping, not a tested device–bridge pair
Temperature · Illuminance · Occupancy
The bridge documents these function types. Commission the required KNX command and feedback objects in ETS, then map them in the bridge. Exact model pairing has not been tested; receiving-app support must also be checked.
View mapping source ↗Function mapping, not a tested device–bridge pair
Temperature · Illuminance · Occupancy
The bridge documents these function types. Commission the required KNX command and feedback objects in ETS, then map them in the bridge. Exact model pairing has not been tested; receiving-app support must also be checked.
View mapping source ↗Presence · Illuminance · Temperature · People counting
Product research reviewed: Nov 4, 2026. This is separate from price, stock and installation-test dates.